November 11

How Often Should I Run my Pool Robot?

0  comments

A study presented during the ISES Solar World Congress 2017 found that there was a significant improvement in pool cleanliness when robotic pool cleaners were used to replace the existing pressure cleaner.

That is why one of the best purchases you can make for your swimming pool is a good robotic pool cleaner because of its cutting-edge cleaning technology.

However, when it comes to cleaning requirements, every swimming pool is a little different. In the same way, each robotic pool cleaner has its own cleaning capabilities. In this article, you’ll learn how often you should run your robotic pool cleaner.

In summary, you should run your robot pool cleaning at least once a day if you swim in it frequently. If you don’t swim in it often, run it once or twice a week. You can wash your pool once a month if you use a swimming pool cover all the time.

 

Getting the Most From Your Pool Robot

How Long Should You Run Your Robotic Pool Cleaner?

Every robotic pool cleaner is unique in terms of the cleaning mechanisms it employs and the pool surfaces it is intended to clean, so generally speaking, how long you should run your robotic cleaner is nearly entirely dependent on the robotic pool cleaner you have.

Some robotic pool cleaners are made to clean the pool’s flooring and walls. Some are designed to clean a swimming pool’s floors, walls, and waterline.

If your robotic pool cleaner cleans the floors, walls, and waterline, it will take longer to clean than if it only cleaned the floors and walls.

To that end, each robotic pool cleaner is unique in terms of how thorough it is. A robotic pool cleaner that is particularly thorough will take longer than a robotic pool cleaner that is not as thorough.

Most robotic pool cleaners will clean your swimming pool in two to four hours, give or take. However, this is dependent on the settings provided by the robotic pool cleaner, what it cleans, and how it cleans.

The majority of robotic pool cleaners offer a setting that allows you to clean your entire pool in a few hours. This is usually a rather thorough cleaning, and while it is effective and powerful, it is not always required.

Use the “Basic Cleaning” mode instead of the others if it is available, particularly if you use the pool on a regular basis. This guarantees that just the most critical dirt and debris are removed, while the rest that is superfluous is ignored. This saves you time and money.

If you just clean once a week or once a month, go ahead and do the full cleaning. It’s the best choice because it ensures that all debris is disposed of, reducing the chance of dirt and debris buildup.

 

Best Pool Robot Cleaners

Dolphin Nautilus CC Plus AIPER Orca 1300 Polaris 9650iQ Sport Robotic Cleaner
The Dolphin Nautilus CC Plus is ideal for in ground swimming pools up to 50 feet and leaves your pool sparking clean within two hours. The AIPER Orca 1300 is a powerful suction robotic pool vacuum that features roller brushes that do twice the amount of cleaning when compared to other robotic pool cleaners. The Polaris 9650iQ Sport Robotic Cleaner is great for in ground pools and comes with an app to control this robotic cleaner.
check check check

 

 

Can You Leave Your Robotic Pool Cleaner in the Pool?

You’ve just purchased one of the best robotic pool cleaners and set it to work. Should you keep it in the pool now that the cycle is complete, or should you take it out?

The quick answer is that you can, but should not, leave it in the pool. Continue reading to find out why.

Increased wear and tear

It is possible to swim while your bot cleans the pool, although it is preferable not to. Swimming causes the water to churn up. If the machine is submerged at the moment, the current will pummel it, making it more difficult for it to fulfill its task. It will have to work harder to clean the same amount of area.

The change in pH can harm the plastic if you leave the machine in the pool when adding chlorine. Repeated exposure may cause the plastic to wear out faster than it would otherwise.

The cycle may only need to be repeated two or three times per week. Leaving the equipment in the water for that long unnecessarily exposes it to the elements. This exposure could hasten the deterioration of the seals, resulting in leaks and damage to the electronic components.

Compromised Power Supply

The power source for most robotic pool cleaners is water-resistant, but that isn’t enough to keep it safe if it’s raining outside. Leaving the power source in standing water may cause it to malfunction. When not in use, keep the machine and its power source in a covered location.

Clogged Filter

The most significant reason for retrieving the cleaner after usage is one of convenience. You’ll need to empty the filter container. A blocked filter makes it difficult for water to flow as it should through the machine.

When your robotic pool cleaner becomes clogged, it has to work more to clean the same area. It will be significantly less energy efficient. Running your machine with excessive blockage raises the chance of the motor burning out.

Even if your cleaner has a top-loading filter box, you will need to bring it to the surface to extract the filter. You might as well take it out of the pool now that you’ve gone through the trouble.

After each use, remove your robotic pool cleaner from the water and thoroughly rinse it. This lets you check for damage, clean out the filters, and extend the life of your cleaner. Given that most robotic pool cleaners weigh less than 10kg, this is a simple task that pays off substantially.

 

The Bottom Line

During the hot summer months, your family is most likely spending the majority of their time at the pool. And if you have a lot of people swimming in your pool all the time, it will be dirtier than before. Keep in mind that individuals bring a lot of dirt and grime with them, and this can cause germs to spread and put your family at risk of the most common swimming-related illnesses.

Furthermore, if you do not cover your pool, yard waste such as grass, twigs, and leaves will be able to enter the water and clog your pool’s filtration system.

You should run your robot pool cleaner on a regular basis, or at least once a day if you swim in it frequently. However, if you don’t swim in it as much, run it at least once a week or every two weeks.


Tags


You may also like

>